How to easily clean your kitchen tiles


Fundamental tricks to make one of the parts of the house that accumulate the most dirt impeccable

The kitchen is one of the parts of the house that we use the most and that accumulate the most dirt. Therefore, it is important to stop cleaning it and take special care that it is as well cared for as possible.

One of the points where dirt is most focused on is the tiles. Especially in the areas closer to the fires or the glass-ceramic, more food debris can fly out and require a greater effort when cleaning.

We give you several tips so that your work on kitchen tiles is as complete as possible … and without entailing an excessive effort.

Put the order in your kitchen

The first thing you should do is move away from everything you have on the hob in the vicinity of these fires or the glass-ceramic. This will prevent them from getting wet. You can also remove what hangs on the walls that you want to clean, and even sweep the broom on the floor so that the dust does not cause more problems if it mixes with the water that falls from your cleaning.

Use soap and water

Take a basin, fill it with water, add some liquid soap, and use it to do the basic cleaning. With your scouring pad, you can use the soft part to remove light dirt and the rough part to scrub the most stubborn dirt. Then, remove the soap residue with a damp cloth and finish with kitchen paper or a last clean and dry cloth.

Ammonia or vinegar

The ammonia will help you disinfect some tiles or in cases where a lot of greases have accumulated. Prepare hot water mixed with this element, use rubber gloves for cleaning and ventilate the kitchen when cleaning. Rub the joints well, finish rinsing with water, and finish drying with a cloth. In the case of vinegar, the procedure is similar (a part of white vinegar for three of hot water in the mixture) and go over the end with a soaked cloth.

To clean the joints

If the gaps between tile and tile have become blackened or dirty, keep in mind that you can restore them to their original condition with specific products. Another option is to use baking soda. It will be worth two tablespoons mixed with water until you get a paste, which you can apply with a toothbrush. After a few minutes, you should remove it with a sponge.

Get the shine back

Using a glass cleaning product you can make the tiles look shinier. If you do this once a week, the effort required to maintain the shine will be much less and these will stay in better condition for much longer.


Please enter your comment!
Please enter your name here